Edge Protection & Roof Fall Protection
Christchurch
WorkSafe-Compliant Fall Protection Across Canterbury
Book a free site visit within 24–48 hours — we'll measure your roof, check access and put an itemised written quote in front of you.
What Is Roof Edge Protection?
Roof edge protection is a temporary guardrail system fixed along the eaves, gable ends or perimeter of a roof. It stops people and materials falling off the edge while trades work. In New Zealand it must meet AS/NZS 4994 and is the most common way to manage fall risk on residential roofs.
Re-roofing, replacing spouting, installing solar or building new? A fall from a single-storey roof can cause serious injury, and New Zealand has no “safe” minimum height. Our edge protection gives roofers, builders and homeowners a continuous guardrail around the roofline, so work starts on time and stays compliant.
Why Christchurch roofers & builders choose our
Edge Protection Christchurch
Falls from height are one of the biggest risks on any building site. Our edge protection is installed to WorkSafe guidelines by a SiteWise accredited team, and it is compliant with NZ standards — ready for any WorkSafe site visit.
What You Get:
Guardrail systems compliant with NZ standards — top rail, mid rail, toe board
SiteWise accredited scaffolding company
Free site visit within 24–48 hours
Fast installation — same-week start
Installed to WorkSafe guidelines
Flexible hire for the length of your job
Don’t let a missing edge rail shut your site down. Get compliant protection in days, not weeks.
Need it on-site fast?
BOOK FREE SITE VISIT
OUR EDGE PROTECTION
SOLUTIONS
INCLUDE
Roof Edge Protection
Guardrail posts clamp to the fascia or eave line, with rails that follow the roofline to the apex, including gable ends. For re-roofs, spouting and fascia, solar installs and roof painting on Christchurch homes and commercial roofs.
GET ROOF QUOTEConstruction Site Edge Protection
Perimeter edge protection for new builds, multi-storey construction, fit-outs and refurbishments, including open floor edges, stairwells and voids. Coordinated alongside scaffolding installs to avoid trade delays.
REQUEST PRICINGIndustrial & Plant Edge Protection
Heavy-duty fall-protection systems for plants, factories, processing facilities, warehouses and flat commercial roofs. Designed around live operations — install around active equipment with minimal downtime.
BOOK SITE VISITScaffold-Based Systems
A scaffold platform at eave level for two-storey homes, steep roofs and longer jobs, plus specially planned edge protection for roofs over 35°, heritage restoration and irregular footprints.
DISCUSS YOUR PROJECTWhen Is Edge Protection Required in New Zealand?
New Zealand has no minimum height for managing falls. WorkSafe’s August 2026 working-at-height guidelines say any fall risk from any height must be managed, and recommend physical barriers or fall restraint for any potential fall over 1 metre. On a residential roof, edge protection is usually the simplest way to comply.
| Situation | What NZ guidance expects | Source |
|---|---|---|
| Any roof work, any height | Fall risk must be managed. WorkSafe calls the idea that falls under 3 m need no controls “dangerous and incorrect”. | WorkSafe, Good Practice Guidelines for Managing the Risks from Working at Height (Aug 2026) |
| Potential fall over 1 metre | Physical barriers (such as edge protection or scaffolding) or fall restraint recommended | WorkSafe (Aug 2026) |
| Single-storey homes | Roof edge protection guidance includes working on single-storey buildings | WorkSafe, Working on Roofs guidelines |
| Roof pitch over 25° | Edge protection should be system-rated and fitted with infill panels (AS/NZS 4994.2:2023 requires infill on slopes over 26°) | WorkSafe (Aug 2026); AS/NZS 4994.2:2023 |
| Roof pitch over 35° | Specifically designed (engineered) edge protection — outside the standard’s scope | WorkSafe (Aug 2026); AS/NZS 4994.2:2023 |
| Scaffold where a person could fall 5 m or more | Erected by a Certificate of Competence (CoC) holder; WorkSafe notified at least 24 hours before work starts | WorkSafe notifiable work rules |
How we keep your site compliant
- Systems compliant with NZ standards and installed to WorkSafe guidelines
- Top rail at least 900 mm above the working surface, plus mid rail and toe board
- Continuous protection that follows the roofline to the apex, including gable ends
- Infill panels on roofs steeper than 25°; a specific solution for roofs over 35°
- WorkSafe notified at least 24 hours ahead for any scaffold with a fall of 5 m or more
Roof Edge Protection Specialists
Roof edge protection is the most requested fall-protection system we install — for re-roofs, gutter and fascia replacement, solar panel installs, chimney repairs and roof painting. We supply both scaffold-mounted and freestanding roof edge protection across Christchurch, sized to your roof pitch, cladding and access needs.
Combining scaffold edge protection with residential scaffolding in Christchurch or commercial scaffolding? We quote it as one system — one install crew, one handover, one invoice.
Edge Protection Pricing in Christchurch: What Affects the Cost
As a rough guide, roof edge protection on a single-storey Christchurch home commonly sits somewhere around $600–$1,200 + GST. What you pay depends on the length of roof edge, number of storeys, roof pitch, site access, travel distance and how long you need it. We give an itemised written quote after a free site visit.
Indicative only — this is not a quote. The figures below are rough guides based on past Christchurch jobs, published to help you budget. What you actually pay depends on the job type, the size and height of the structure, site access and ground conditions, travel distance, how long you need it and any council requirements. We confirm pricing only in a written quote after a site visit.
| Cost factor | Why it changes the price | Christchurch example |
|---|---|---|
| Length of roof edge | More rail, clamps and labour | A villa with several gables needs more rail than a simple hip roof |
| Storeys and height | Two-storey homes often need scaffold-based protection; 5 m+ scaffolds require a CoC holder and WorkSafe notification | Two-storey homes in Halswell and Rolleston subdivisions |
| Roof pitch | Over 25° adds infill panels; over 35° needs an engineered system | Steep character homes and A-frame roofs |
| Site access and ground | Sloping or uneven ground takes longer to set up safely | Port Hills sites in Cashmere, Mt Pleasant and Sumner |
| Hire duration | Hire includes the first 4 weeks; longer jobs are charged weekly | Re-roofs delayed by weather |
| Footpath or road use | Council approval, a Corridor Access Request and traffic management are needed if gear sits on legal road. CCC charges $57 per m² per month (minimum $237) | Street-front shops and townhouses in the CBD and Sydenham |
| Wind exposure | Exposed sites and any sheeting or shrink wrap need extra ties and bracing | Nor’west-exposed sites in Selwyn and the Port Hills |
| Travel | Rural sites may carry a small travel surcharge, quoted upfront | Rural properties across Selwyn and Waimakariri |
Tell us your address, roof type and start date — we’ll price your job properly after a free site visit.
GET MY EDGE PROTECTION QUOTESee typical prices for all our services in our Christchurch scaffolding cost guide.
SAFETY & COMPLIANCE
Every edge protection installation we deliver is:
Compliant with NZ standards
Installed to WorkSafe guidelines
Free site visit within 24–48 hours
Infill panels over 25°, specific solutions over 35°
A WorkSafe visit shouldn’t be the moment you find out your edge protection isn’t up to standard. Get it right from day one.
AREAS
WE SERVICE
We install edge protection throughout:
Christchurch
Rolleston
Rangiora
Lincoln
Canterbury
Christchurch City: CBD, Addington, Riccarton, Sydenham, Woolston, Ferrymead, Sumner, Cashmere, Halswell, Papanui, Burnside · Selwyn: Rolleston, Lincoln, Prebbleton, West Melton, Darfield · Waimakariri: Rangiora, Kaiapoi, Woodend, Pegasus
Need edge protection on a tight deadline?
REQUEST URGENT INSTALLExplore more scaffolding services
Edge protection often runs alongside our other scaffolding work.
Residential scaffolding Christchurch
Painting, re-roofing, re-cladding for Christchurch homes.
Commercial scaffolding Christchurch
Multi-storey access for builders and developers.
Industrial scaffolding Christchurch
Plant, factory and warehouse access.
Mobile scaffold tower hire
Tower hire for short-term and trade work.
Frequently asked questions
Usually, yes. New Zealand has no minimum height for managing falls, and WorkSafe recommends physical barriers or fall restraint for any potential fall over 1 metre. WorkSafe's roof work guidance specifically includes single-storey buildings. Edge protection is the most practical option for re-roofs, spouting and solar installs.
Generally, yes. Edge protection uses less equipment and installs faster than a full scaffold, so it usually costs less for single-storey re-roofs and spouting work. Full scaffolding is better when trades need a working platform along the walls, on two-storey homes or on steep roofs.
Most residential installs can start within a few days of you approving the quote, and we often have same-week availability. Larger, two-storey or steep-roof jobs take longer to fit. We confirm the install date on your quote after the free site visit, and schedule it around your roofer's start date.
We notify WorkSafe at least 24 hours before erecting any scaffold where a person could fall 5 metres or more, as the law requires. Most single-storey edge protection jobs sit below that height, but the fall risk still has to be managed — which is exactly what edge protection does.
Yes. For roofs steeper than 25°, we use system-rated edge protection with infill panels. Roofs over 35° are outside the scope of the standard, so we plan a specific solution — often scaffold-based — for those. We check the pitch at your free site visit.
Our roof edge protection is compliant with NZ standards and installed to WorkSafe guidelines for working at height.
Roof Job Starting Soon?
Call 0800 961 921 to lock in an install slot — Monday to Friday, 7am–5pm. Or request a free quote and we’ll visit your site within 24–48 hours.
Free Site Visits Within 24–48 Hours
Compliant with NZ Standards
Fast Installation
Installed to WorkSafe Guidelines